• LMC-4200R benchtop centrifuge with refrigeration

    Benchtop centrifuge with refrigeration with a temperature setting range of -10°C to +25°C.  Interchangeable rotors for accommodating centrifuge tubes (10 to 15 ml or 50 ml) or microplates.

    • Spin speed: up to 4200 rpm for tubes, up to 2000 rpm for microtitre plates
    • Temperature setting range -10 to 25ºC
    • Timed operation (1 to 90 minutes), with automatic switch-off
    • ‘Soft-start’ and ‘run-down’ functions
    • Choice of interchangeable rotors for up to 12 centrifuge tubes or 2 microplates
    • Auto ‘IMBALANCE’ stop and warning diagnostics
    • Low noise level
    • Sturdy metal housing and lid, automatic imbalance switch-off and lid lock when centrifuge is running providing safe operation in your workplace
    • Effective acceleration (run-up up 15 sec.) and deceleration ( run-down up to 30 sec)
    • Refrigeration rate inside the chamber under 10 minutes
    • Easy set-up of speed and time via 2-line LCD display and simple push buttons display of actual and set temperature, speed and time
    • Convenient interchangeable rotor for 6 or 12 tubes or 2 microplates (standard and deep well). Specify when ordering
    • The powerful and extremely quiet motor has a ‘soft’ start-up and run-down function to avoid jolting of samples
    • Compact design with small footprint – fits neatly into the workspace


    Centrifuges – models and specifications

    Benchtop centrifuges


    Max RCF (bottom of tube) g-force g 3160
    Speed (centrifuge tubes) rpm 100 to 4200
    Max RCF (microtitre plates) g-force g 560
    Speed (microtiter plates) rpm 100 to 4200
    Centrifugation time up to 90 minutes
    Speed increment rpm 100
    Chamber diameter mm 335
    Display LCD 2 lines
    Nominal operating voltage V ac 230
    Power consumption W 990 W (4.3 A)
    Ambient temperature range °C +25
    Maximum noise dBA


     Internet Explorer browser is not supported

    Use an alternative browser to access PDFs for view and download.

    Product Manuals:

    Further Information:


    Adapter sets for R-12-10 (pack of 12)

    Part No


    BN-13-75 for vacutainers 2-5mL (ø13 x 75mm)
    BN-13-100 for vacutainers 4-8ml (ø13 x 100mm)
    BN-16-100 for vacutainers 8-9ml (ø16 x 100mm)

    Centrifuges – Accessories

    Benchtop centrifuges  LMC-4200R  low speed

    Part No



    R-6 interchangeable centrifuge rotor for 6 x 50 ml tubes, with cap, conical end ø29 x 115mm
    R-12-10 interchangeable centrifuge rotor for 12 x 10 to 15 ml tubes, rounded ends, no caps ø16x 105mm
    R-12-15 interchangeable centrifuge rotor for 12 x 15 ml tubes, with cap, conical end ø17x 120mm
    R-2 interchangeable centrifuge rotor for 2 microtitre plates Suitable for deepwell plates max dims 128 x 85.6 x 45mm (w x d x h)