• R5 Series Refrigerated Circulating Bath

    The Grant R5 refrigerated bath and circulator range provides outstanding performance for routine and sophisticated applications requiring accurate temperature control in the range of -47 to 100°C. A choice of 4 heating circulators combined with a powerful R5 refrigeration unit offers a cost-effective and efficient solution for low temperature applications.

    The Grant R5 range, which can be combined with any of our T100, TC120, TX150 or TXF200 heating circulators, offer a number of features:

    • Stability of up to ±0.1°C
    • Up to 3 years warranty
    • No spill valved front drain
    • 3 preset programs
    • Optimal 12L tank for rapid cool-down
    • Environmentally friendly refrigerant
    • Robust construction
    • 1.1kW
    • Built in Britain
    • Range of accessory hosing, connectors, software, additional pumps and temperature probes available

    Note: The refrigeration unit can be switched off independently of the heating circulator to allow heating only applications. All the refrigeration base units can be used up to a maximum temperature of 100°C.

    Applications

    • University research/teaching – temperature control of external equipment including: spectrophotometers & refractometers. Circulation of temperature control fluid to jacketed vessels, cooling crystallisation vessels
    • Industrial laboratories – temperature probe calibration, product testing, product QC, temperature control of external equipment.

    Specifications

    Dimensions (h x d x w)610 x 590 x 414mm
    Capacity12L
    Temperature range (T100)0-100ºC
    Temperature range (TC120)-20 to 100ºC
    Temperature range (TX150)-47 to 100ºC
    Temperature range (TXF200)-47 to 100ºC
    RefrigerantR404a
    Working Area (d x w)260 x 115mm
    Min/Max liquid level125/180mm
    Cooling power (typical) @20ºC1100W
    Cooling power (typical) @0ºC1050W
    Cooling power (typical) @-10ºC800W
    Cooling power (typical) @-20ºC580W
    Cooling power (typical) @-30ºC370W
    Cooling power (typical) @-40ºC130W
    Cooling power (typical) @-47ºC25W
    Electrical power (max) 120V
    Electrical power (max) 230V1400W (50Hz)
    Relay control*
    Weight48.3kg

    .

    Downloads

     Internet Explorer browser is not supported

    Use an alternative browser to access PDFs for view and download.

    Product Manuals:

    Further Information:

    Accessories

    Chillers – Heat Exchange Coil

    Attach to a supply of cooling tap water or a refrigerated circulator

    Part No

    Description

    CW5Temperature range: 2ºC above the temperature of the coolant

    External Probes

    For monitoring and controlling temperature of remote loads

    Part No

    Description

    TXPEPFlexible plastic probe, 3m cable
    TXSEPStainless steel probe, 3m cable

    Hose Kit

    Additional hose kits assembled with LT ecocool/ OptimaTM pump outlet plate and hose clips.

    Part No

    Description

    HOSE100General purpose hose kit, includes 2 x 2m general purpose insulated hosing -40 to 100˚C, assembled with LT ecocool/OptimaTM pump outlet plate and simple hose clips, no tools required
    HOSE200High temperature hose kit, includes 2 x 2m high temperature insulated hosing -50 to 200˚C, assembled with LT ecocool/OptimaTM pump outlet plate and simple hose clips, no tools required

    Labwise

    Optional PC software

    Part No

    Description

    LabwiseAllows two-way communication for status display, programming and data capture

    Pump Connectors

    Optional

    Part No

    Description

    P-M6Replacement plastic pump inlet/outlet connector. Fits tubing 9mm inner dia. Temperature range -50 to 200ºC
    P-M11Replacement plastic pump inlet/outlet connector. Fits tubing 15mm inner dia. Temperature range -50 to 200ºC
    M-SR4Metal pump inlet/outlet connector, dual seal super rapid 4mm. Fits semi rigid tubing 4mm outer dia. Temperature range -20 to 100ºC
    M-SR6Metal pump inlet/outlet connector, dual seal super rapid 6mm. Fits semi rigid tubing 6mm outer dia. Temperature range -20 to 100ºC
    M-SR8Metal pump inlet/outlet connector, dual seal super rapid 8mm. Fits semi rigid tubing 8mm outer dia. Temperature range -20 to 100ºC
    M-HB7Metal pump inlet/outlet connector, hose barb 7mm. Fits flexible tubing 7mm inner dia. Temperature range -40 to 120ºC
    M-HB9Metal pump inlet/outlet connector, hose barb 9mm. Fits flexible tubing 9mm inner dia. Temperature range -40 to 120ºC
    M-HB12Metal pump inlet/outlet connector, hose barb 12mm. Fits flexible tubing 12mm inner dia. Temperature range -40 to 120ºC
    M-UCMetal pump inlet/outlet plate, 1/4‘‘ BSP/G1/4 female. Temperature range -50 to 200ºC

    Vertical Turbine Pump

    Low noise, compact design. Supplied with pipe connections and special lid for fitting to tanks, pipe bore 12.7mm.

    Part No

    Description

    VTP1-LTMaximum pressure 1000 mbar, Maximum flow 9 L/min
    VTP2-LTMaximum pressure 1650 mbar, Maximum flow 12 L/min

    Accessory Notes

    Required only where application demands a higher pressure than that delivered by the internal pump to maintain flow.