R4 Series Refrigerated Circulating Bath
The Grant R4 refrigerated bath and circulator range provides outstanding performance for routine and sophisticated applications requiring accurate temperature control in the range of -47 to 100°C. A choice of 4 heating circulators combined with a powerful R4 refrigeration unit offers a cost-effective and efficient solution for low temperature applications.
Additionally, Grant also offers the LTC4 kit, which is available as a ready assembled system including TX150 heating circulator mounted on the R4 refrigeration unit and comes supplied with insulated tubing and clips.
The Grant R4 range, which can be combined with any of our T100, TC120, TX150 or TXF200 heating circulators, offer a number of features:
- Stability of up to ±0.1°C
- Up to 4 years warranty
- No spill valved front drain
- 3 preset programs
- Large 20 litre tank and accessible bath for immersion of samples
- Environmentally friendly refrigerant
- Robust construction
- 900W of cooling power
- Built in Britain
- Range of accessory hosing, connectors, software, additional pump and temperature probes available
Note: The refrigeration unit can be switched off independently of the heating circulator to allow heating only applications. All the refrigeration base units can be used up to a maximum temperature of 100°C.
- University research/teaching – temperature control of external equipment including: spectrophotometers & refractometers. Circulation of temperature control fluid to jacketed vessels, cooling crystallisation vessels
- Industrial laboratories – temperature probe calibration, product testing, product QC, temperature control of external equipment.
|Dimensions (h x d x w )||550 x 515 x 393mm|
|Temperature range (T100)||0-100ºC|
|Temperature range (TC120)||-25 to 100ºC|
|Temperature range (TX150)||-30 to 100ºC|
|Temperature range (TXF200)||-30 to 100ºC|
|Working Area (d x w)||230 x 305mm|
|Min/Max liquid level||85/140mm|
|Cooling power (typical) @20°C||900W|
|Cooling power (typical) @0ºC||500W|
|Cooling power (typical) @-10ºC||300W|
|Cooling power (typical) @-20ºC||180W|
|Cooling power (typical) @-30ºC||40W|
|Cooling power (typical) @-40ºC||–|
|Cooling power (typical) @-47ºC||–|
|Electrical power (max) 120V||780W (50-60Hz)|
|Electrical power (max) 230V||850W (50Hz)|
Chillers – Heat Exchange Coil
Attach to a supply of cooling tap water or a refrigerated circulator
|CW5||Temperature range: 2ºC above the temperature of the coolant|
For monitoring and controlling temperature of remote loads
|TXPEP||Flexible plastic probe, 3m cable|
|TXSEP||Stainless steel probe, 3m cable|
Additional hose kits assembled with LT ecocool/ OptimaTM pump outlet plate and hose clips.
|HOSE100||General purpose hose kit, includes 2 x 2m general purpose insulated hosing -40 to 100˚C, assembled with LT ecocool/OptimaTM pump outlet plate and simple hose clips, no tools required|
|HOSE200||High temperature hose kit, includes 2 x 2m high temperature insulated hosing -50 to 200˚C, assembled with LT ecocool/OptimaTM pump outlet plate and simple hose clips, no tools required|
Optional PC software
|Labwise||Allows two-way communication for status display, programming and data capture|
|P-M6||Replacement plastic pump inlet/outlet connector. Fits tubing 9mm inner dia. Temperature range -50 to 200ºC|
|P-M11||Replacement plastic pump inlet/outlet connector. Fits tubing 15mm inner dia. Temperature range -50 to 200ºC|
|M-SR4||Metal pump inlet/outlet connector, dual seal super rapid 4mm. Fits semi rigid tubing 4mm outer dia. Temperature range -20 to 100ºC|
|M-SR6||Metal pump inlet/outlet connector, dual seal super rapid 6mm. Fits semi rigid tubing 6mm outer dia. Temperature range -20 to 100ºC|
|M-SR8||Metal pump inlet/outlet connector, dual seal super rapid 8mm. Fits semi rigid tubing 8mm outer dia. Temperature range -20 to 100ºC|
|M-HB7||Metal pump inlet/outlet connector, hose barb 7mm. Fits flexible tubing 7mm inner dia. Temperature range -40 to 120ºC|
|M-HB9||Metal pump inlet/outlet connector, hose barb 9mm. Fits flexible tubing 9mm inner dia. Temperature range -40 to 120ºC|
|M-HB12||Metal pump inlet/outlet connector, hose barb 12mm. Fits flexible tubing 12mm inner dia. Temperature range -40 to 120ºC|
|M-UC||Metal pump inlet/outlet plate, 1/4‘‘ BSP/G1/4 female. Temperature range -50 to 200ºC|
Vertical Turbine Pump
Low noise, compact design. Supplied with pipe connections and special lid for fitting to tanks, pipe bore 12.7mm.
|VTP1-LT||Maximum pressure 1000 mbar, Maximum flow 9 L/min|
|VTP2-LT||Maximum pressure 1650 mbar, Maximum flow 12 L/min|
Required only where application demands a higher pressure than that delivered by the internal pump to maintain flow.