• LT ecocool Refrigerated Circulating Baths

    A new range of innovative, eco-friendly, refrigerated heating circulating baths offering significant running cost savings whilst delivering powerful cooling.

    Consisting of two models, all products in the LT ecocool range are supplied assembled as ready to use kits, complete with accessory hosing, clips and connectors as standard.

    • Choice of two models, temperature range -25°C to 150°C (model dependent)
    • Industry leading 4 year warranty with Grant renowned service and support, no registration required
    • Active cooling through the whole temperature range
    • True energy saving of up to 80% against standard compressor units
    • Built in Britain to the highest specifications
    • Thermostat and chiller work in harmony, neither will operate alone, eliminating any danger of overheating or freezing
    • Single front switch for user convenience
    • Modern, sleek, attractive design

    Applications

    • Pharmaceutical – mini pilot plant reactors
    • Education – rotary evaporator cooling, replacement of running tap water cooling, immersing small samples, photometry, chromatography systems
    • Industrial – QC testing, sample preparation, general cooling, reaction chemistry, temperature control, semi-conductor manufacturing, rheometry
    • Food – refractometry
    • Life-science – electrophoresis cooling
    • High temperature cooling – active up to 150ºC

    Specifications

    LT ecocool energy efficient refrigerated / heating circulating baths

    LT ecocool 100

    LT ecocool 150

    Temperature range °C -20 to 100 -25 to 150
    Temperature stability ±°C 0.05 0.02
    Flow rate (max)  L/min 17 14 – 22 (adjustable)
    Pump pressure (max) mbar 250 530
    Tank volume L 5 6
    Working Area (d x w)  mm 118 x 154
    Min/Max liquid level mm 85/145 130/145
    Calibration points 2 5
    Cooling power (typical)             W @ 20°C 240 385
    @ 0°C 200 205
    @ -10°C 100 105
     @ -20°C 30 60
    Programs 1 x 30 segments via Labwise™
    Communication interface USB
    Temperature probe socket 6 pin mini DIN
    Display 4 digit LED Full colour QVGA TFT
    Languages 5 (EN, FR, DE, IT, ES)
    Timer 1 min to 99 hrs 59 mins
    Temperature presets 3
    Alarms High High and low
    Electrical power (max) W 120V/230V 2160/2070 (60/50 Hz) 2280/2760 (60/50 Hz)
    Safety Adjustable over temperature cut-out
    Ready to use kits Assembled and supplied with standard tubing, insulation, clips and connectors

    Downloads

    Product Manuals:

     

    Technical Datasheets:

     

    Further Information:

     

    Video

    Accessories

    Vertical Turbine Pump

    Low noise, compact design. Supplied with pipe connections and special lid for fitting to tanks, pipe bore 12.7mm.

    Part No

    Description

    VTP1-LT Maximum pressure 1000 mbar, Maximum flow 9 L/min
    VTP2-LT Maximum pressure 1650 mbar, Maximum flow 12 L/min

    Accessory Notes

    Required only where application demands a higher pressure than that delivered by the internal pump to maintain flow.

    Pump Connectors

    Optional

    Part No

    Description

    P-M6 Replacement plastic pump inlet/outlet connector. Fits tubing 9mm inner dia. Temperature range -50 to 200ºC
    P-M11 Replacement plastic pump inlet/outlet connector. Fits tubing 15mm inner dia. Temperature range -50 to 200ºC
    M-SR4 Metal pump inlet/outlet connector, dual seal super rapid 4mm. Fits semi rigid tubing 4mm outer dia. Temperature range -20 to 100ºC
    M-SR6 Metal pump inlet/outlet connector, dual seal super rapid 6mm. Fits semi rigid tubing 6mm outer dia. Temperature range -20 to 100ºC
    M-SR8 Metal pump inlet/outlet connector, dual seal super rapid 8mm. Fits semi rigid tubing 8mm outer dia. Temperature range -20 to 100ºC
    M-HB7 Metal pump inlet/outlet connector, hose barb 7mm. Fits flexible tubing 7mm inner dia. Temperature range -40 to 120ºC
    M-HB9 Metal pump inlet/outlet connector, hose barb 9mm. Fits flexible tubing 9mm inner dia. Temperature range -40 to 120ºC
    M-HB12 Metal pump inlet/outlet connector, hose barb 12mm. Fits flexible tubing 12mm inner dia. Temperature range -40 to 120ºC
    M-UC Metal pump inlet/outlet plate, 1/4‘‘ BSP/G1/4 female. Temperature range -50 to 200ºC

    Labwise

    Optional PC software

    Part No

    Description

    Labwise Allows two-way communication for status display, programming and data capture

    Hose Kit

    Additional hose kits assembled with LT ecocool/ OptimaTM pump outlet plate and hose clips.

    Part No

    Description

    HOSE100 General purpose hose kit, includes 2 x 2m general purpose insulated hosing -40 to 100˚C, assembled with LT ecocool/OptimaTM pump outlet plate and simple hose clips, no tools required
    HOSE200 High temperature hose kit, includes 2 x 2m high temperature insulated hosing -50 to 200˚C, assembled with LT ecocool/OptimaTM pump outlet plate and simple hose clips, no tools required

    LT ecocool 150 – External Probes

    For monitoring and controlling temperature of remote loads

    Part No

    Description

    PEP Flexible plastic probe, 3m cable
    SEP Stainless steel probe, 3m cable